Calcium Sulphate Panel
Home » Products » Calcium Sulphate Panels » Calcium Sulphate Panel

Calcium Sulphate Panel

Calcium Sulphate Raised Access Panel is made of high-strength calcium sulphate(calcium silicate or cement particle board)core. The top surface is stuck with High Pressure Laminate (HPL) or PVC or ceramic, the bottom is covered with aluminum foil or galvanized steel sheet. Four edges are sealed with black PVC edge trim.
Availability:

Introduction:

Calcium Sulphate Raised Access Panel is made of high-strength calcium sulphate(calcium silicate or cement particle board)core. The top surface is stuck with High Pressure Laminate (HPL) or PVC or ceramic, the bottom is covered with aluminum foil or galvanized steel sheet. Four edges are sealed with black PVC edge trim.

Type

P-EC1000 P-EC1250 B-EC1000

Size

600*600*30mm  600*600*32MM  600*600*28MM

Materials

Calcium steel

Installation

stringer system

Finish

HPL/PVC/Ceramic...

Characteristics:

● Good loading capacity and conductivity

● High dimension accuracy and good interchangeability

● Good sealing and water-proof

● Fire-proof , antisepsis and sound insulation

● High dimension accuracy and environmental proof

Application:

High-grade rooms, such as banks, telecommunication centers, smart offices and computer rooms. Areas of high humidity.

Therere two types of calcium sulphate raised floors:

Type One: B-EC

B-EC anti-static calcium sulphate panel consists of high-strength calcium sulphate( calcium silicate or cement particle board) core. HPL or PVC is boned to the top of core and the bottom of the core is bonded with steel sheet. PVC edging strip is glued to be each edge of the panel. 

BEC配图

Type Two: P-EC

Bare calcium sulphate panel consists of high-strength calcium sulphate(calcium silicate or cement particle board) core, steel sheet is bonded to the top and bottom surface of the core. PVC edging strip is glued to each edge of the panel.

PEC配图

Technical parameter:

Name

Type

Size/mm

Concentrated load

Rolling load

Ultimated load

Uniform load

System resistance

P-EC

P-EC1000

600*600*30

4450N/454KG

3560N

13350N

23000N

Anti-static floor system resistance

1O6-1O10Ω

P-EC1250

600*600*32

5560N/567KG

4450N

16680N

33000N

B-EC

B-EC1000

600*600*28

4450N/454KG

3560N

13350N

23000N

Raised Floor Accessories:

----Finishes

Raised floors are widely used in office buildings, data centers, clean rooms and other places. Office buildings mainly use bare finish raised floor, the floor surface needs to be covered with carpet tiles. Data centers need to use anti-static flooring, the floor surface can use different types of anti-static coverings, such as anti-static laminate, PVC tile, ceramic tile and so on.

----Installation accessories

Pedestals are necessary for installation. Stringers are selective. The specifications of pedestals and stringers for different types of flooring are different. Please contact us if you need suggestion.

----Other accessories

Grommet, outlet box, and electronic sockets can be used to facilitate wiring and routing.  In some areas, we can use glass raised floor to monitor the situation under the raised floor.


Previous: 
Next: